Cal Spas SWIM PRO SPAS, Owner'S Manual

Page: 86 / 100

85
6. Keeping Fit With Your Swim Spa 6. Keeping Fit With Your Swim Spa
6.1 Air Injection System 6.1 Air Injection System
Use the control panel to start and stop the Air Injection
System. The JET 1 and JET 2 buttons control the top and
bottom jets.
Use the air venturi valves to inject air in the water streams
for even more power.
6.2 Swim Tether 6.2 Swim Tether
The swim tether pole has three pieces and assembles
easily. Slide the ends of the top and middle sections into
the middle and bottom sections.
Insert the tether in the anchor hole when you are ready to
use it.
Buckle the strap around your waist. It is easily adjustable
and can accommodate most sizes.
6.3 Exercise Equipment 6.3 Exercise Equipment
IMPORTANT: Always consult your physician before start-
ing any exercise activity or program. The Ultimate Fitness
series spas feature rubber exercise bands. When stretched,
these bands create a high tension condition. Improper
use or failure to connect the exercise bands properly may
cause injury. Always inspect all of the exercise equipment
prior to beginning any exercise. Do not use any damaged
equipment.
This equipment attaches to the exercise anchors located
on the spa walls.
Connecting the Exercise Equipment
The drawings below show different ways the exercise kit
can be connected depending on the exercises you wish to
do.
For 14 foot spas and model F-1222
The exercise kit contains:
• Two hand grips
• Two ankle braces
• Two 6” elastic bands
• Two 18” elastic bands
• Two 25” elastic bands
• Two rowing bars
For 16 and 17 foot spas
The exercise kit contains:
• Two hand grips
• Two ankle braces
• Two 18” elastic bands
• Two 25” elastic bands
• Two 56” elastic bands
• Two rowing bars