Cal Spas SWIM PRO SPAS, Owner'S Manual

Page: 12 / 100

11
2.10 Filling and Powering Up your Portable Spa 2.10 Filling and Powering Up your Portable Spa
Step 1. Step 1.
Inspect the spa equipment.
Inspect all plumbing connections in the equipment area of your spa.
• Make Sure unions in the equipment pack are tight. (Be careful not to over-tighten the plumbing fittings.)
• If your spa has gate valves, make sure they are all in the UP or OPEN position.
• Make sure the drain valve is closed and capped. (See page 97 for a description of drain valves)
NOTE: Never run the spa with the gate valves closed or without water circulating for long periods of time.
Step 2. Step 2.
Remove the cartridge from the filter canister.
Unscrew the cartridge and remove it.
If you have a skimmer like this:
Grip the filter by the handle and unscrew it from the canister. Never try to pull the filter cartridge while the spa is
running in low or high speed (i.e., any speed).
If you have a skimmer like this:
Remove the black skimmer cap and barrel, grip the filter by the handle and unscrew it from the canister.
Teleweir Mega filter skimmer
• 75 square feet filtration
• Smooth cap