2009 Inground Spas
LTR20091002, Rev. B
Cleaning and Maintenance
www.calspas.com
34
Cleaning the Cover, Shell and Pillows
Due to the constant punishment your spa cover and pillows receive, you should protect them by applying
Vinyl and Leather Cleaner as part of your monthly maintenance plan. Cal Spas™ Vinyl and Leather Cleaner
is specifically designed to protect spa covers and pillows from chemical and ultraviolet light damage. It ac
-
complishes this without leaving an oily residue behind that is normally associated with common automotive
vinyl protectants.
Use of Vinyl and Leather Cleaner
Cal Spas™ Vinyl and Leather Cleaner should be used
sparingly. Incorrect usage may cause water clarity
issues.
Spa Covers
Remove spa cover from spa.
1.
Allow spa cover to dry completely.
2.
Spray Vinyl and Leather Cleaner to cover evenly
3.
and wipe dry.
Allow spa cover to dry completely.
4.
Reinstall cover on spa.
5.
Pillows
Wipe pillows dry with a soft
1.
cloth.
Carefully spray Vinyl and
2.
Leather Cleaner directly onto
pillow.
Wipe pillows dry.
3.
Allow pillows to dry complete-
4.
ly.
Warning: Do not use automotive vinyl protectants
on spa covers or pillows. These products are gener-
ally oil-based and will cause severe water clarity is-
sues that are difficult to correct.
All-Purpose Cleaner (Spa finish
cleaning)
Cal Spas™ All-Purpose Cleaner is an essential part of
maintaining your spa’s finish. Through normal use,
the spa’s finish can accumulate dirt, oil, and calcium
causing a rough feel and unsightly scum lines. Cal
Spas™ All-Purpose Cleaner is a low detergent, non-
abrasive cleaner specifically formulated to clean the
spa without damaging its acrylic finish.
The most effective solution to minimize cleaning time
is prevention. When the following steps are followed,
the spa’s finish will actually start to resist most of
the elements that cause calcium build-up and make
scum line clean up easier.
Prior to Spa Start-Up and Refilling
Spray Cal Spas™ Multi-Purpose Cleaner directly
1.
on to the spa’s finish.
Wipe clean with a clean soft cloth.
2.
Repeat on heavily calcified areas.
3.
Wipe spa thoroughly with a wet
4.
sponge, rinsing often with a buck-
et of clean water.
Allow spa to dry completely.
5.
Apply a coat of Cal Spas™ Fast
6.
Sheen to the spa’s entire finish
with a soft towel or sponge.
Allow Fast Sheen to dry until white
7.
and powdery.
Buff clean with a soft cloth, rotating frequently.
8.
Periodic Maintenance
Spray Cal Spas™ Multi-Purpose Cleaner directly
1.
to the spa’s finish.
Wipe clean with a clean soft cloth.
2.
Wipe spa thoroughly with a wet sponge, rinsing
3.
often in a bucket of clean water.
Cal Spas™ Multi-Purpose Cleaner should not be
sprayed directly into the spa water. Incorrect usage
of this product will cause water clarity issues.
