background image

INOVA-EX

Installation Instruction

This installation instruction is an annex of the operation manual. However, this instruction contains important 

information. Please keep this installation instruction in a safe place for your future reference as well as

the operation manual.

Installation Procedure

1

Carry the chair to the predetermined position.

After removed from the pallet, the chair must

be lifted up from the floor with holding the iron

Plate below the UP/DOWN switch and then

carried with holding the base.

Base.

UP/DOWN Switch

Hold the pallet when carrying.

(If holding the upper part only, the base may drop

off. This may cause injury.)

2

Apply a rabber ring to the base. 

After the chair is placed on the installation position, apply a rubber ring to the rim of the 

base with lifting the base from the floor.

 

3

Connect the equipment to the power supply.

Use an outlet of AC 230V(7A or higher).( 220V/240V (7A or higher),110V/120V (12A or higher)) 

Rubber Ring

Base

Lifting one side and next the

other side of the chair will

ease the operation.

This will prevent electric shock and protect the electric circuits. If you fail to connect the earth, we will

not assume responsibility to any accident due to electric leakage.       

Be sure to connect the earth.

Warning

Do not lift the front portion of the seat, the seat portion will break and it may

cause bodily harm or property damage.

Reviews: