Installation Instructions for Electronic Stand-Alone Cylindrical Locks
- 7 -
1. Mounting Plate Assembly
2. Mounting Plate Screws
3. Inside Escutcheon
4. Inside Escutcheon Screw
5. Battery Cover
6. Battery Cover Screw
7. Spacer Bushing
8. Inside Lever
Step #3 Prepare Lock for Installation
A. Unpack the Lock
The lock is packed in such a way to represent how it will install on the door.
Before installation:
1. Disassemble the inside escutcheon.
1) Remove the inside lever and spacer bushing with the lever removal tool provided.
2) Separate the mounting plate assembly from the inside escutcheon.
2. Remove the battery cover
1) Unscrew the battery cover screw using the #2 phillips screw driver.
2) Take the battery cover off.
The outside assembly stays assembled.
B. Adjust for Door Thickness (If Necessary)
Lock is factory-assembled for 1-3/4"(45mm) thick doors.
It can be adjusted for door thickness range from 1-3/8"(35mm) to 2"(51mm).
