Cal Amp vanguard, User Manual

Page: 35 / 69

34

Destination Address
User may enter an accessible IP address or URL that will respond to a ping command.

Secondary Address
User may enter an accessible IP address or URL that will respond to a ping command. This address will be used if
the entered number of consecutive ping failures using the first address is reached.

Periodic Ping Timer
User may enter an interval in increments of 10 seconds. The modem will ping the destination at that interval. Enter
0 to disable this feature.

Fail Count
The modem will reset if the number of consecutive ping failures is equal to or greater than this entry and the
secondary address is being used. Otherwise the modem will switch from the first address to the secondary address
for the ping test.
PPP Data Usage Estimates
This section tracks the data received from and transmitted to the cellular network. This is a tool that may be used to
estimate network usage. These totals are tracked by the router. Your carrier maintains separate statistics from which your
billing is determined. One way to use this tool is to track usage over a fairly short period of typical usage. The total then can
be extrapolated to estimate longer time periods. This router updates these statistics once approximately every 30 seconds.
Press the Clear button to reset the totals to 0.

Rx Bytes
The total number of bytes received by the modem from the cell network. All statistics will be cleared automatically
if this count exceeds 1 billion (1,000,000,000).

Rx Packets
The total number of TCP and UDP packets received by the modem from the cell network.

Rx Errors
The number of corrupted TCP and UDP packets received by the modem from the cell network.

Rx Packets Dropped
The number of TCP and UDP packets received by the modem from the cell network that were not accepted. This
may occur due to memory or throughput problems.

Tx Bytes
The total number of bytes transmitted by the modem to the cell network. All statistics will be cleared
automatically if this count exceeds 1 billion (1,000,000,000).

Tx Packets
The total number of TCP and UDP packets transmitted by the modem to the cell network.

Tx Errors