Cal Amp vanguard, User Manual

Page: 29 / 69

28
Click the Write MDN/MSID button when the required information has been entered.
Enable/Disable OMA-DM Activation
This section will only be displayed for units which are capable of automatic (OMA-DM) provisioning. You may choose to
enable or disable the automatic provisioning and save your desired setting. If enabled, and the unit is not provisioned
(activated), each time at power-on (only) the unit will attempt an auto-activation. This capability is dependent on whether
or not it is offered by your cellular carrier.

Auto-Activation
Choose Enable to direct an unprovisioned unit to attempt OMA-DM activation once per power-up.
Click SAVE to activate the desired settings.
Manual Initiation of OMA-DM Provisioning
This section will only be displayed for units which are capable of automatic (OMA-DM) provisioning. The activation status is
displayed, and a button is provided to direct the unit to begin an OMA-DM provisioning attempt. Depending on changes to
your carrier's network, it may be necessary to re-provision a unit that has already been activated. The OMA-DM capability is
dependant on whether or not it is offered by your cellular carrier.

Activation Status
Displays the device activation status: Activated or Not Activated
Click OMA-DM to trigger an OMA-DM provisioning attempt.
Activation Type
This section is displayed for units that are not capable of automatic (OMA-DM) provisioning. Availability of OMA-DM is
carrier dependant. For carriers that do not support OMA-DM, the provisioning process must be triggered by entering carrier
specific information and depressing the carrier specified button (OTASP or IOTA).

Command (OTASP Only)
The dial command used for provisioning the modem. For OTASP the number is *22899. For IOTA this field is left
blank.
Click OTASP button to start the provisioning process for units using Verizon.
Click the IOTA button to start the provisioning process for units using Sprint.
3.3.3 ADVANCED SETTINGS
The Advanced Settings screen supports the programming of 2 profiles that may be used to login to the cellular provider's
network. It also allows the user to choose which profile is active. A provider may support alternate networks whose use is
limited to specific customers. Login information must be gathered from the provider. Be aware that incorrect parameter
settings could result in no access to the standard network, and no access to the alternate network.