001-0003-822 Rev 1
Page 12 of 48
Find and select “Internet Protocol (TCP/IP)” from the list box and then click the “Properties” button
(Figure 4.1). The TCP/IP configuration window will pop up, refer to Figure 4.2. Under the General
tab, select radio button “Obtain an IP address automatically” and “Obtain DNS server address
automatically” (Figure 4.2). Click the OK button to close TCP/IP configuration window. Click the
Close button to complete the computer preparation for the 822-1XRT/882-EVDO modem.
Figure 4.2: Internet protocol (TCP/IP) properties screen
Connect an antenna to the RF connector on the front panel of the 822-1XRT/882-EVDO modem.
Connect the Ethernet cross-over cable into the 822-1XRT/882-EVDO modem’s Ethernet Port and
plug the other end into the network port of your PC. Connect the Power Adapter to the 822-
1XRT/882-EVDO modem and plug into a proper AC power socket. The Power LED on the panel
should activate. The Service LED (SVC TYPE) and RSSI LED will light green to indicate the 822-
1XRT/882-EVDO has finished starting up and is functioning.
