Checking the front connectors
Tool: Allen key 5mm, wrench 12mm, Torx 45.
1. Carefully fold up the rubber protection enclosing the headlight.
2. Unscrew the headlight.
3. Unscrew the 4 screws (A) holding the plate to access the front connectors.
4. Check that the connectors are properly fastened.
5. Attach the plate. Tighten the 4 screws holding the plate to 17Nm.
6. Fasten the headlight to 10Nm.
7. Fold down the rubber protection enclosing the headlight.
8.6 Suspension, fork, rear
Checking the forks for any leakage
Wanted state: When applying pressure to the handlebar/forks, it should
bounce back. There should be no oil leakage on the fork suspension sealings.
1. Check that the handlebar/forks bounce back when applying pressure to it.
2. Check for any oil on the fork suspension sealing.
3. If necessary, order a new fork suspension from CAKE and mount it, see
Fig. 21
Accessing the front connectors
41
A
Summary of Contents for Makka
Page 1: ...Makka Manual Makka Manual...
Page 62: ......
