
3.6 Drivetrain and Chain
Chain
Make sure that the chain tension is correctly adjusted, as described on the
swingarm. Make sure that the chain is in good condition.
3.7 Brakes
Look at the front and rear calipers to see that they or the brake brackets are
not damaged. Look at the front and rear brake pads to see that they are not
worn out. Look in the window to see that there is enough brake fluid in the
brake housings on the handlebar. Make a brake test to check that both the
front and rear brake works properly.
4. Remove and Installation
4.1 Battery and Seat
In order to remove the battery please follow the steps below. Make sure that the
bike is standing securely before removing either the seat and/or the battery pack.
Removing the seat
Use a 5 mm hex key and unscrew the screws under the seat. Then pull the
seat upwards and backward in order to remove the seat.
Summary of Contents for Kalk OR
Page 1: ...KalkOR Manual...
Page 23: ......