Attention
: If bars „---”, like these are indicated that can mean that: the thermistor was not
connected, or the thermistor is damaged, or the temperature range was exceeded. If the value of the
air humidity is indicated with bars „---”, it means that the measuring range was exceeded.
●
Pressing the function key will cause sequential switching between the individual measured
values. The value of the measured parameter is shown enlarged on the screen, in this way one
can emphasize the variable of interest. In this operating mode on the bottom of the screen in
„the information ledge” other parameters are sequentially shown. Further pressing of the
function key different values are highlighted in the way already previously explained.
Information
ledge
●
Sixfold fast pressing of the function key causes the menu of the instrument is activated. Here
the settings of the language, temperature unit, automatic switching off and the information
ledge can be changed. Following Options can be selected:
●
Languag [English, Deutsch]
●
Temperature Units [°C, °F]
●
Automatic switching off [ Off, 3Min., 5Min., 10Min.] – the downtime determines, after
which time the measuring instrument is switched off automatically. As downtime the time
is considered, in which the function key is not pressed. If the automatic switch off function
is adjusted to „off”, the equipment can be switched off only manually.
●
The information ledge [1sec, 2sec, 4sec]
– determines die refreshing rate of the values in
the information ledge.
CAISSON Elektronik GmbH
Boschstrasse 16, D-47533 Kleve, Deutschland
tel: +49(0)2821-894390
