CAISSON ELEKTRONIK GmbH
Boschstrasse 16, D-47533 Kleve, Deutschland
T: +49 (0) 2821-894390
[email protected] www.caisson-gmbh.de
• To switch on the measuring device, press the function
button.
• When switched on, the device shows:
»
air temperature,
»
relative humidity,
»
dew point,
»
surface temperature.
Note:
If bars „---”, like these „---” show up, they can indicate that:
• the thermistor is not connected,
• the thermistor is damaged,
• the temperature range is excessive.
• Pressing the function key will cause sequential switching between the individual measured values. The
value of the measured parameter is shown enlarged on the screen; in this way one can highlight the
variable of interest. Other parameters are sequentially shown in this operating mode the bottom of the
screen in „the infobar”. Press the function key again to have other values highlighted.
