background image

email:  [email protected]   [email protected] 

+44(0)1795 590140   www.cairn-research.co.uk

S e t   u p   g u i d e

OPTO

SPLIT 

II 

Optosplit II: Key controls table

Control

Description

V1

Vertical adjustment for the shorter wavelength image

V2

Vertical adjustment for the longer wavelength image

H2

Horizontal adjustment for the longer wavelength image

Split

Separates the two images horizontally.
Always turn ANTI-CLOCKWISE for optimal image separation

Component mounts

Drop-in positions used to insert a variety of different components into 
the light path of either the shorter (reflected) wavelength or longer 
(transmitted) wavelength image. These include:
• 

Shutter plate: used to physically block one of the channels 

when utilising ‘single-channel’ mode
• 

Neutral density (ND) filter: useful when one image is dispropor-

tionately brighter than the other
• 

Corrector lens: used to reduce chromatic aberration and en-

sure both pathways are focussed on the camera sensor

Trim

Corrects vignetting, which is characterised by one image appearing 
darker towards one edge. See the ‘Image Optimisation’ section.

Longer (transmitted)
wavelength channel

Shorter (reflected)
wavelength channel

Summary of Contents for OptoSplit II









Reviews: