email: [email protected] [email protected]
+44(0)1795 590140 www.cairn-research.co.uk
S e t u p g u i d e
OPTO
SPLIT
II
Installing the Optosplit II in the Light Path
Having fitted the camera to the output port of the Optosplit II it should be possible to
adjust the image to see a sharp picture of the aperture edges with the sample in focus.
The image should line up with the edges of the aperture and should not have any rota-
tion or slant in either direction. If your software can display a rectangular ROI then the
image of the aperture can be aligned to this.
Image.
Image.
Component mounts
H2 adjuster
V1 adjuster
V2 adjuster
Split adjuster
Clamp screw
Trim controller
Optosplit II: Key controls
The Optosplit II uses a single control for adjusting image separation (Split Adjuster) and allows for different sized
camera chips to be used. There are additional controls for refining the ROI, and centering the image.
Support leg mount
