CAIRE Companion 5 Technical Manual Download Page 41 | Manualshive

Page: 41 / 41

CAIRE Companion 5 Technical Manual Download Page 41

Oxygen Concentrator

PN 14940837 B — 41

CAIRE Inc. Customer Service Contact Information

I

f you need any additional assistance, contact CAIRE Inc:

By mail:

CAIRE, Inc.
2200 Airport Industrial Drive, Suite 500
Ball Ground, GA 30107 USA

By telephone

: 800.482.2473

By E-mail:

[email protected]

www.CAIREmedical.com

Authorized European Union Representative:

Medical Product Services GmbH
Borngasse 20
35619 Braunfels, Germany

E-mail:

[email protected]

www.CAIREmedical.com

Companion 5® are registered trademarks of CAIRE Inc.
PRO2 Check Elite™ is a trademark of Salter Labs Inc.
Lysol® is a registered trademark of Reckitt Benckiser, UK.

Copyright © 2014 Chart Industries. CAIRE Inc. reserves the right to discontinue its products, or change the prices, ma-
terials, equipment, quality, descriptions, specifications and/or processes to its products at any time without prior notice
and with no further obligation or consequence. All rights not expressly stated herein are reserved by us, as applicable.

«
...
39
40
41

Summary of Contents for Companion 5










































Reviews:

No comments