- 14 -
Here below you can find the procedure to set up and to use the programmer :
It is necessary to configure the serial connected to the Robot only the first time.
1.
Select File-Set up
2.
Select the serial port
Update Procedure
1. Select guided File Update
2.
In the models with advanced mode we must leave the
auto recognition activated
N.B. Disabled for the models of previous version
3.
Auto recognition successfully completed.
Press the key “Next”
4.
The programmer suggests the possible updates for this
model.
●
Fu
ll Update Total update of all the electronic devices.
Suggested procedure.
•
Update boot loader.. It resets the boot Software needed to
update the new boards. After updating a board with the
boot loader it is necessary to update the board with the
Manual procedure..
•
Update Motherboard Only.Update of the only mother
board.