15
Spring clips
6” +
2”
Lift complete assembly into position - ensuring the ladder
folds down in the correct direction.
Firmly push assembly until it ‘clicks’ into position. (Clips will
hold assembly in position until structurally fixed.)
Unfold first stage ladder section.
Check final position and make necessary adjustments.
Fix ladder to the suspension frame with (4) M8 x 3” set
screws utilizing pre-drilled holes. (3 sets screws per side)
When ladder closes, top of ladder protrudes
1 3/4” beyond ladder frame
Allow 2” gap to ensure ladder assembly does not
impact on the void end. Insert packer to close
gap if aesthetically required.
Two person lift is recommended.
Do not attempt to climb ladder
until installation is complete.
If ceiling opening is a boxed
out design greater than 6”
thick (such as a concrete or
trimmed out opening), a 2” gap
is required at the head of the
ladder to allow clearance for
the protruding ladder assembly
when stowed away.
12
13
14
DISTRIBUTED BY © CAI Safety Systems | (951) 465-7386 | https://caisafety.com | [email protected]
