OPERATION OF THE
HOTSHOT HEATER:
• Remove the heater from all packaging and place it in the desired location
• Ensure that there is a safe distance between the heater and furniture, curtains etc.
• Unwind the power cord and plug it into the power outlet
• To activate the heater, turn the knob clockwise to the position for cool air. Turn knob to
for low power and for maximum power
• Use the thermostat knob to set your desired temperature
• When you feel the room temperature is comfortable, turn the thermostat switch counter
clockwise slowly until the unit switches off
• The thermostat will keep the room at this desired temperature automatically
No liability can be accepted for any damage caused by noncompliance with these instructions or
any other improper use or mishandling.
– 3 –
AUTO SAFETY SHUT OFF:
The
HotShot
has a built in safety device, which will shut the heater off in case of accidental
overheating. To reset the heater follow these steps:
• Turn the control setting to the position
• Unplug the heater and wait 5-10 minutes for the heater to cool down
• After the unit has cooled, plug it in and operate normally
CLEANING AND MAINTENANCE:
Be sure to switch off power and unplug the unit before cleaning.
• Wait for the heater to cool down sufficiently
• Clean the body of the heater with a damp cloth.
DO NOT ALLOW
water into the appliance
•
DO NOT
use soap or chemicals that could damage the housing of the heater
• Allow sufficient drying time before operating again
• Clean the air inlets and outlets regularly with a vacuum cleaner
• When the unit is not in use we recommend that the heater is placed back in its original
packaging
• Do not dispose of electrical appliances as unsorted municipal waste, use separate collection
facilities.
Summary of Contents for HOTSPOT 9316CABBX
Page 11: ......
