10
English
No coffee comes out.
The indicator light
D
blinks
RED
.
The water tank is empty.
Fill the tank with fresh water. Press
a button to refill the circuit. When
the buttons are lit up steady, the
appliance is ready to use.
The coffee is not hot
enough.
- Cold cups / espresso
cups.
- Scale build-up in
machine.
- Prewarm the cup.
- Descale.
The lever cannot be
lowered.
- The used capsule drawer
is full.
- Capsule stuck inside the
machine.
- Empty the used capsule drawer.
- Remove the stuck capsule.
The indicator light
D
is
lit up steady
RED
.
Warming up problems.
Switch the machine off, then on
again. If the problem persists,
take the machine to an Authorised
Service Centre.
When a button is
pressed to dispense
coffee, the machine
seems to start but
then stops without
dispensing coffee, or
only dispenses a small
amount.
Incorrect programming of
amounts.
Reprogram the amount for the
button.
See the section “Programming the
amount of coffee in a cup”.
The materials and
objects in contact with
food products comply
with the requirements
of European Regulation
1935/2004.
Technical data
Troubleshooting
PROBLEM
POSSIBLE
CAUSE
CURE
See the data plate
on the bottom of the
machine.
Max. 15 bar
Approx. 3 kg
< 70dB A
0.7 litres
ambient temperature:
10°C ÷ 40°C
110 mm
330 mm
8 capsules
235 mm
370 mm
Summary of Contents for S33
Page 1: ...English Instruction manual Model S33 ...
Page 2: ...2 1 4 7 10 5 8 11 3 6 9 12 2 ...
Page 11: ...11 ...