Caffitaly System S22, Instruction Book

Page: 26 / 80

26
PROBLEM POSSIBLE CAUSE CURE
No coffee comes out. The
indicator light
G blinks
RED .
The water tank is empty. Fill the tank with fresh water. Press
a button to refi ll the circuit. When the
buttons are lit up steady, the appliance
is ready to use.
The coffee is not hot
enough. - Cold cups / espresso cups.
- Scale build-up in machine. - Preheat the cup.
- Descale.
The lever cannot be
lowered. - The used capsule drawer
is full.
- Capsule stuck inside the
machine. - Empty the used capsule drawer.
- Remove the stuck capsule.
Indicator light G is on
steady and RED .
Heating problems. Turn the machine off, then on again. If
the problem persists, take the machine
to an Authorised Service Centre.
When a button is pressed
to dispense coffee, the
machine seems to start
but then stops without
dispensing coffee, or only
dispenses a small amount. Incorrect programming of
amounts. Reprogram the amount for the button.
See the section "Programming the
amount of coffee in a cup".
Coffee is dispensed very
slowly, and is of poor
quality. Button C was used with an
espresso capsule.
Use buttons A or B .
The milk jug will not fi t. Wrong position of pin in jug lid. See Fig. 18 and the section "Daily
Cleaning".
The materials and
objects that come into
in contact with food
products comply with
the requirements of
European Regulation
1935/2004.
See the data plate on the
bottom of the machine.
Max. 15 bar
Approx. 6 kg
< 70dB A
1.3 litres
ambient temperature:
10°C ÷ 40°C
220 mm
375 mm 18 capsules
280 mm 360 mm
Technical data
Troubleshooting
English