10
3. Setting Up Your Machine
First Use or After a Long Period of Non Use
• Fill the tank with fresh, still water (Fig. 4).
• Plug in the appliance and turn it on (Fig. 13).
• Make sure the lever is closed (Fig. 3).
• As well as buttons
,
warning light
E
also blinks in
RED
.
• Place a large container (at least 250 mL) under the dispensing spout (Fig. 9).
• Press one of the buttons , wait for the machine to complete the priming cycle and
fill with water. Warning light
E
will switch off.
Note
: If at the end of the priming cycle buttons and warning light
E
continue to blink, repeat the procedures as listed in the previous step.
• Buttons will blink simultaneously to indicate that the machine is warming up.
• When buttons turn on and remain steadily lit, perform a rinse by pressing
button . Press the button again to perform a second rinse. Wait for the machine to
complete the rinse cycle.
• At the end of this operation, empty out the water from the used capsule drawer (Fig. 6).
Now your machine is ready for use
Turning on the Appliance for Regular Use
•
Fill the tank with fresh, still water (Fig. 4).
•
Switch on the appliance by pressing the power on/off switch (Fig. 14).
•
Buttons will blink simultaneously to indicate that the machine is warming up.
When the buttons turn on and remain steadily lit, the appliance is ready for use.
English
