15
English
5. Cleaning & Maintenance
Daily Maintenance
• Remove the drip tray and used capsule drawer.
• Lift the used capsule drawer; empty and rinse it.
• Remove the water tank (Fig. 5); empty and rinse it.
• Remove the coffee dispenser by pulling it out.
• Remove the top cover of the coffee dispenser and the bottom part (Fig. 16), wash the parts
in hot water, then dry and refit them.
• Fill the milk jug with water and dispense by pressing button
F
.
• Turn the milk jug lever clockwise to the left (Fig. 12) and remove the milk jug lid by pulling
upward.
• Wipe the steam outlet fiting (
Z
) with a damp cloth.
• Remove the milk dispenser (Fig. 17), wash the parts with a cleaning product, paying
particular attention to the milk jug lever, dry and refit them.
• Make sure the jug lid pin is in the correct position, otherwise turn it clockwise (Fig. 18).
• Make sure the milk dispensing lever is in the dispensing position (Fig. 10).
Note
: Traces of the product just dispensed may remain inside the machine.
When dispensing hot chocolate or instant beverages, for full flavour we suggest
rinsing the machine by pressing any button ( , or ) without inserting
a capsule.
We recommend carrying out this procedure at least once a week.
Use a soft cloth and a neutral
detergent to clean the surfaces of
the appliance. Do not use jets of
water to clean the appliance.
The plastic parts of the machine,
including the water tank, are
not
dishwasher safe.
