13
Customising the Size of Your Beverage
• Raise the lever to open the capsule compartment (Fig. 1).
• Close the lever fully (Fig. 3).
• Place a cup under the dispensing spout (Fig. 7 or 8).
•
Press and hold the button you wish to override the setting on.
• On reaching the desired amount of coffee, release the button. Now the button is
programmed.
The quantity of beverage dispensed can be programmed from a
minimum of 20 mL up to a maximum of 250 mL.
• Raise the lever to eject the used capsule into the drawer (Fig. 1).
• Close the lever (Fig. 3).
Dispensing Coffee With Milk
• Fill the jug with the desired amount of milk.
• Make sure the milk jug lever is in the dispensing position (Fig. 10).
• Fit the milk jug in its place (Fig. 5). Buttons
D-E-F
blink. Wait until they light up and remain
steadily lit.
• Raise the lever to open the capsule compartment (Fig. 1).
• Insert the capsule, pressing it gently into place (Fig. 2).
• Close the lever fully (Fig. 3).
• Place a cup under the coffee and milk dispenser (Fig. 8).
• Press (briefly) button
D
or
E
, depending on the desired beverage with milk.
• The pressed button will blink. The machine dispenses the programmed amount of milk.
The coffee is then automatically dispensed.
• Dispensing stops if the button selected during the cycle is pressed.
• Raise the lever to eject the used capsule into the drawer (Fig. 1).
• Close the lever (Fig. 3).
Note
: For better results, use milk at temperature approx. 4°- 8°C. If the jug is removed
and put in the fridge, it is advisable not to keep the milk for more than two days.
Do the "Milk jug cleaning cycle" (see the relevant section) after every dispensing of
a beverage with milk.
English
