16
User settings according to user taste
Default settings control the amount of water that is dispensed for each type of coffee. These settings
can be changed by the user to his /her liking in order to make a stronger or weaker coffee.
For each type of coffee, the user can set one amount of water only.
•Insert the capsule into the capsule holder.
•Pull the lever down.
•Place a cup in the middle of the drip tray grating.
•Press the ON/OFF switch button to turn ON the appliance. The button will start blinking.
When the button stops blinking and lights steadily, the machine is ready for use.
•Press the button, corresponding to the amount of water to be set and keep it pressed.
Default settings can be changed for light, medium and strong coffee.
•When the desired amount of water has been dispensed, release the button. The machine will
then learn the new amount.
•Check if the new setting is correct. If not, repeat the procedure.
Note:
The coffee machine incorporates an advanced electronic
system to control its numerous functions for making coffee
and dispensing steam.
To prevent malfunctions, do not turn on the coffee machine
immediately after turning it off. Wait about 10 seconds
before switching it on again. Also, adhere to the operating
instructions.
Resetting the default settings
The Reset function allows the user to return to factory
settings after he/she has made personalised settings.
•Press the ON/OFF switch button to turn OFF the
appliance.
Press and hold the two buttons shown by the figure
simultaneously
(Fig. 17)
(strong coffee and light coffee)
•Turn ON the machine by pressing the ON/OFF switch.
•Release the buttons after 5 seconds.
•Press the ON/OFF switch button to turn OFF the
appliance.
•Turn ON the machine again by pressing the ON/OFF
switch.
The default settings are now reset.
coffee selection buttons
Fig. 17