Safety Precautions
Cleaning Instructions
Disassembly: Remove the top lid and filter assembly. To remove the top lid, hold the
filter with one hand, and pull the top lid back and up with the other hand. Remove the
glass carafe from the stainless steel housing by holding the stainless steel housing
with one hand and firmly twist and pull up on the glass with the other hand until it
slides out.
There should be 4 main parts to clean:
Wash all parts with dishwashing soap and warm water. Avoid cleaning stainless steel
housing with brushes or steel wool as it will cause scratches and will dull the finish.
Dry all parts. Place glass carafe back into the stainless steel housing.
CAUTION: Note the carafe is fully removable from the stainless steel housing.
Wash thoroughly before use.
Inspect glass carafe thoroughly for scratches, cracks, or chips.
Do not use if any are found on the glass carafe.
Inspect the filter and all other components for any frayed or scrap metal.
Do not use Cold Brew Coffee Maker if any frayed or scrap metal is found.
CAUTION:
Use caution while handling all parts of the Cold Brew Coffee Maker,
including the filter. There are sharp edges that need to be handled with care. The
edges of the stainless steel housing are very sharp! Be sure to inspect glass carafe for
chips, cracks, or other sharp edges before use.
Keep out of reach from children and infants.
DO NOT put top lid or filter assembly in the dishwasher as it may cause the silicone
seals to warp. Stainless steel housing and glass carafe are dishwasher safe.
Not for use on stovetop. Do not place on a heated surface.
Always place on a dry, flat, non-slip surface.
Use extra coarse ground coffee only. Finely ground coffee may pass through
the filter and end up in your coffee.
Do not overfill past the max fill line.
1
3
4
5
6
7
8
9
10
2
Top lid
Filter assembly
Glass carafe
Stainless steel housing
1
3
4
2
3
Summary of Contents for COLD BREW COFFEE MAKER
Page 1: ...COLD BREW COFFEE MAKER User Manual and Brewing Guide ...
Page 8: ......
