19
1
2
3
Ensure drain hose is routed straight to the joiner
so that waste water does not accumulate in the
hose. Remove excess drain hose material if
necessary.
Do not shorten the inlet hose.
min. R 8”
(200 mm)
IMPORTANT
Ensure that drain connection
will comply with local
plumbing regulations.
29 1/2 - 34 3/4” (750-883 mm)
Supplied drain hose joiner to suit
Ø 3/4” (19 mm) waste tee
29 1/2”-34 3/4” (750-883 mm)
max.
4 3/4 “
(120 mm)
min. 19 1
1/16” (500 mm)
Screw Drain hose
support to back wall at
correct height.
If space is limited
for fixing, push
hose through drain
hose support
to required height.
Installation Instructions
THERE ARE THREE DIFFERENT PLUMBING AND DRAINAGE OPTIONS - CHOOSE WHICH IS MOST SUITABLE
DRAINAGE OPTION 3 - Dishwasher using drain hose joiner onto sink trap/waste tee
NOTE:
See, the
“CONNECT
INLET HOSE
TO HOT
WATER” step.
Summary of Contents for CDD420P2TS1
Page 22: ...22 Notes...
Page 23: ...23 Notes...
Page 24: ...24 Printed in Thailand 31 4000257 Rev 0 11 21 GEA 518862...
