CAENels Flucs CT -100, User Manual

Page: 13 / 28

CT-100/CT-150 Series User’s Manual Installation and Operation
13
2.1.1
“C” - version and Pinout
The CT-100/CT-150 series “C” models have a standard D-sub 9-pin connector
(i.e. “DE-9” or, commonly referred to as “DB-9”) in both their current output and
voltage output versions. The standard pin numbering to refer to is herein presented in
Figure 4
.
Figure 4: D-sub 9 connector pin numbering
The pinout for the “C” versions are presented in
Table 2
. These two versions
have current or voltage output pins (and their signal returns).
Pin #
CT-100-C or
CT-150-C
(Current Output)
CT-100V-C or
CT-150V-C
(Voltage Output)
1 I
S
return nc - GND
2 nc V
OUT
3 Status -
4 GND
5 -15V
6 I
S
Internal Use
7 nc V
OUT
return
8
9 +15V
Table 2: CT-100/CT-150
“C” versions pinout
Please note that pins not internally connected on the specific model are indicated
in
Table 2
as nc = not connected . Please DO NOT connect pins indicated as Internal
Use . Please note that, internally, Is is directly connected to GND .
Pin #1
Pin #6
Pin #9
Pin #5