CT-100/CT-150 Series User’s Manual
2.
Installation and Operation
General considerations and description of pinout and functionalities are herein
presented.
2.1
Mechanical Considerations
Each version of the CT-100/CT-150 current transducer presents an embossed
“arrow” on the plastic part of the casing that indicates the verse of positive primary
current measurement. This arrow can be seen in
150 mechanical enclosure).
Figure 3:
embossed arrow indicating the verse of positive primary current
The primary conductor hole diameter Ø in all models is rated at 16 mm (about
5/8”).
As presented in the previous section, two different models that differ by connector
type are commercially available, as well as different versions (current- or voltage-
output).
Negative Current
Positive Current
Summary of Contents for Flucs CT -100
Page 28: ...DC User s Manual...
