Caen NGPS, User Manual

Page: 56 / 57

Technical Specifications NGPS – User’s Manual
56
6. Technical Specifications
The main technical specifications for the NGPS models are hereafter presented:
Technical Specifications NGPS
Output current range
See Table 1a
: Standard NGPS models
and 1b
Output voltage range See Table 1a
: Standard NGPS models
and 1b
Maximum output power
See Table 1a
: Standard NGPS models
and 1b
Regulation Type Current- or Voltage- Control
Current and Voltage Setting 18 bit
Current and Voltage Readback 20 bit
Output insolation 500 V
Power Factor > 0.93
Efficiency > 90%
Max Current/Voltage update rate 10 kHz (over SFP)
Closed-loop Bandwidth
> 100 Hz (C.C. mode)
> 200 Hz (C.V. mode)
Accuracy
< 0.01% (0.005% upon request) (C.C. mode)
< 0.05% (C.V. mode)
Line Regulation ±5 ppm / FS
Load Regulation ±5 ppm / FS
Remote Sensing Compensation up to 2V
Cooling
(Air cooling models)
Forced Air Convection (front-to-rear)
Cooling
(Water cooling models)
Water Flow: 1.5 l/m
Water Pressure Drop: 1.5 bar
Max Water Input Pressure (continuous): 8 Bar
Service Forced Air Convection (front-to-rear)
Temperature Stability
5 ppm/K (C.C. mode) (1ppm/K upon request)
50 ppm/K (C.V. mode)
Communication interfaces
1x Ethernet 10/100/1000 TCP-IP
2x SFP ports
Itnernal Interlocks
Over-Temperature
MOV Input Over-Voltage
Main circuit-breaker for Over-Current
Output Free-wheeling diodes
Output Over-current and Over-Voltage
Earth current leakage
Input Phase-Loss (DC-link undervoltage)