NGPS – User’s Manual
26
Figure 9:
Trigger thresholds
Analog Control Input
The analog control input allows controlling the NGPS unit almost as an
“amplifier”. This input is labelled as “AN CTRL”.
This input accepts signals ranging from 0V to +10V and generates an output
which is proportional to the input signal: zero output for a 0V input and Full-Scale
output for a +10V input. An example of the relation between the analog input signal
and the output (can be either current or voltage, depending on the Regulation mode, see
Section 1.3.1
Figure 10:
AN CTRL vs OUTPUT dependence
0
1
2
3
4
5
6
Trigger Input
HIGH LEVEL
LOW LEVEL
Analog Control
Analog Input
Output
0%
+10V
0V
100%
ABSOLUTE MAXIMUM
Trigger Signal
50%
+5V
