Caen RFID R1280I, Technical Information Manual

Page: 18 / 83

CONFIGURATION MENU - skID Technical Information Manual 18
 Inter Line Delay (ms): The Inter Line Delay is the delay between printing one last character of a line
and the first character of the next line. It is expressed in ms. The default value is 0. If set to 0, the
reader does not introduce delay: the only delay is that of the BT of the device in use. The use of the
Inter Line Delay is recommended to slow down the sending of characters from the reader to mobile
devices, as these are not performing enough to keep up with the Bluetooth transmission, with the
risk of losing characters.
EPC code parameters
Using the table below you can customize the text of the code displayed on the screen:
Tab. 2.1: EPC Code parameters
 EPC Code: enable or disable. By default, the EPC Code is enabled and the EPC code is displayed
on the screen. You can change the default value using the drop-down menu.
 PREFIX: The PREFIX option permits to specify a string to add before the EPC when a tag is read.
The following list shows the accepted characters for the prefix:
'a', 'b', 'c', 'd', 'e', 'f', 'g', 'h', 'i', 'j', 'k', 'l', 'm', 'n', 'o', 'p', 'q', 'r', 's', 't', 'u', 'v', 'w', 'x', 'y', 'z', 'A', 'B', 'C', 'D', 'E',
'F', 'G', 'H', 'I', 'J', 'K', 'L', 'M', 'N', 'O', 'P', 'Q', 'R', 'S', 'T', 'U', 'V', 'W', 'X', 'Y', 'Z', '0', '1', '2', '3', '4', '5', '6', '7',
'8', '9', '{', '|', '}', '!', '"', '#', '$', '(', ')', '*', '+', ',', '.', '/', ':', ';', '=', '?', '@', '[', ']', '^', '_', '-'
By default the prefix string is empty.
Y
Warning: if you are using a qwerty keyboard, pay attention that it is a standard qwerty
keyboard because if not the conversion of symbols could create display problems.
 SUFFIX: The SUFFIX option permits to specify a string to add after the EPC when a tag is read.
The following list shows the accepted characters for the postfix:
'a', 'b', 'c', 'd', 'e', 'f', 'g', 'h', 'i', 'j', 'k', 'l', 'm', 'n', 'o', 'p', 'q', 'r', 's', 't', 'u', 'v', 'w', 'x', 'y', 'z', 'A', 'B', 'C', 'D', 'E',
'F', 'G', 'H', 'I', 'J', 'K', 'L', 'M', 'N', 'O', 'P', 'Q', 'R', 'S', 'T', 'U', 'V', 'W', 'X', 'Y', 'Z', '0', '1', '2', '3', '4', '5', '6', '7',
'8', '9', '{', '|', '}', '!', '"', '#', '$', '(', ')', '*', '+', ',', '.', '/', ':', ';', '=', '?', '@', '[', ']', '^', '_', '-'
By default the suffix string is \r\n\ (see the following table Tab. 2.2: Escape Sequences supported
page 18).
Y
Warning: if you are using a qwerty keyboard, pay attention that it is a standard qwerty
keyboard because if not the conversion of symbols could create display problems.
Escape Sequences Description
\n Newline (Line Feed)
\r Carriage Return
\t Horizontal Tab
\v Vertical Tab
\\ Backslash
Tab. 2.2: Escape Sequences supported