CONFIGURATION USING THE WEB INTERFACE
Quattro Technical Information Manual
19
NETWORK
The NETWORK submenu options are the following:
DHCP:
Enable/Disable. By default the DHCP is set to
disable.
You can change the default value
using the drop-down menu
IP Address:
the reader default IP address is 192.168.0.2. The Quattro reader can be connected to
a PC using an Ethernet cable: in order to correctly operate with the reader refer to
page 41.
Subnet Mask:
the reader default subnet mask is 255.255.255.0.
Gateway:
the reader default gateway is 192.168.0.1.
DNS Server:
the reader default DNS server is 8.8.8.8.
Warning:
To save the changes click on the “
SAVE
” button. Note that all changes made via the
web interface are active only after the reader’s reboot. Click on
SYSTEM
option in the Web
Interface panel and then click on the “Reboot” button. After reboot, the new settings are active.
