qIDminiNF CONFIGURATION MENU
- qIDmini NF Technical Informa tion Manual
43
PROFILE
Access the configuration menu as explained in the
Introduction
paragraph page 41.
The PROFILE menu is the first option of the main menu. To select it, hold down the
trigger
button.
To scroll through the PROFILE options, press quickly the
trigger
button. The currently active profile is marked with an
asterisk.
The PROFILE submenu options are the following:
•
EASY2RD
(factory default): choosing this option you select the CAEN RFID easy2read communication
protocol. Select this option in order to control the reader using the
CAEN RFID Easy Controller Application
or
the
SDK (Software Development Kits)
library. For details on the use with the EASY2RD profile please refer to
§
qIDminiNF EASY2RD PROFILE
chapter page 16.
•
HID
: choosing this option you select the keyboard emulation protocol. For details on the use on the HID
profile please refer to §
qIDminiNF HID PROFILE
chapter page 28.
•
OFFLINE
:
choosing this option you select the
stand-alone mode
and the reader stores EPC codes into the
internal memory when the communication links (USB or Bluetooth®) are not available.
The
EASY2RD
and
HID
profiles require the presence of a nearby host that controls the reader (pc, tablet…), while in the
OFFLINE
profile the reader works in stand-alone mode.
To return to the main menu, quickly press the
power
button.
You can activate only one profile at a time.
To activate a different profile, scroll through the PROFILE options by pressing quickly the
trigger
button until the
desired profile is displayed. Hold down the
trigger
button for a few seconds: the name of the profile will begin to flash.
Once activated, the device returns to the main menu.
When you turn on the reader, the display shows the currently active profile and then the message "ready" to inform
you that the reader is ready to operate.
Warning:
Note that if the reader is in the HID profile you must disconnect it from any connected device before to
select another profile.
Y
