FAST-Bi-1K5 – User’s Manual
38
3.6
Front Panel Indicators
The FAST-Bi-1K5 has four LED indicators on the front panel as shown in the
Figure 27:
Front panel indicators
The front panel LED indicators and their behaviour are hereafter listed
(clockwise starting from top-left):
•
C.C.
: Constant Current mode (
blue
). If turned on, the FAST-Bi-1K5 is working
in constant current mode. When off, it regulates in Constant Voltage mode
(C.V.);
•
STAT
(
green
): it signals the correct working-operation of the module
diagnostics by blinking with 1-second period;
•
OUT ON
(
blue
): it signals that the output is enabled. The blue LED lights-up
when output is enabled regulating either in C.V. or C.C. modes;
•
ALARM
(
red
): if turned on, it signals that one or more fault conditions has
occurred. When the fault condition/cause has been removed, it is necessary to
reset the PS fault status register in order to be able to enable the output of the
PS again.
Additionally, there are 2 push buttons indicated as “HW” and “SW”.
These push
buttons are for debug purpose only, do not use them
.
