Ethernet Communication
EnBOX User’s Manual
26
3.2
CAENels Device manager
The free software
“CAENels Device manager”
can be used to search for all
the EnBOX devices connected to the local network and to configure them. This
software also allows to set the network configuration of the found devices and to
update their firmware.
The
“CAENels Device manager”
is available for Windows and Linux
platform and the system requirements hereafter listed:
•
Windows minimum system requirements:
➢
Windows® XP or newer
➢
Intel® or equivalent processor
➢
80 MB available HD space
➢
Ethernet network card
•
Linux minimum system requirements:
➢
Linux kernel 2.2.x or newer
➢
Intel® or equivalent processor
➢
80 MB available HD space
➢
Ethernet network card
3.2.1
Searching for connected devices
Please follow the next steps in order to search for the EnBOX devices
connected to the local network:
-
connect the host PC and the EnBOX directly with an Ethernet cable (or
through a network);
-
verify that the
“Link LED”
on the RJ45 connector is turned on (
amber
for a 1
Gbps connection as shown in
Figure 4
or
green
for a 100 Mbps connection).
The LED is turned off if the Ethernet cable is not connected or if the speed of
connection is limited to 10 Mbps (in this last case the device is working
correctly even if it is not recommended to use a slow connection since the data
transfer rate is limited);
