TR-MAN-4500-A
Operator's Manual - 4000M 4500M
Page 6 of 46
Safety Precautions
Please take the time to read and
understand
this manual so that unnecessary
errors and risks are avoided. If you have any questions or concerns, please contact
Cadman Power Equipment Ltd.
or your local dealer/distributor.
•
DO NOT
move or operate this machine until you have read
and understand these instructions in this manual.
•
NEVER
allow untrained persons to operate this machine.
•
DO NOT
attempt to service this machine while it is in
operation.
•
MAKE CERTAIN
all mechanical and hydraulic tension has
been released before attempting any service on the
machine.
•
CHECK
all fasteners (nuts and bolts) regularly for tightness.
•
PERFORM REQUIRED MAINTENANCE
as prescribed or
as necessary to keep this machine in safe operating
condition.
•
KEEP ALL SPECTATORS
at a safe distance.
•
STAY CLEAR of high pressure supply lines, especially when first pressurizing
the system.
•
DO NOT
remove or alter any shielding on this machine.
•
BE CERTAIN
that the machine is securely anchored (using stabilizer legs) before
unwinding the hose.
•
KEEP CLEAR
of all moving parts.
•
NEVER
tow this machine at speeds greater than
10 mph / 16 km/h
and be certain
the tow vehicle has adequate braking capacity to maintain safe control at all times.
•
REGULAR INSPECTION
of your pipe couplings, tubing and gaskets should be a
part of your regular set-up routine. Any defective parts
MUST
be replaced or
repaired before the machine is put into service.
This symbol, the safety-alert symbol, indicates a hazard. When you
come across this safety-alert symbol in this manual, make certain you
fully understand and abide by the given instructions or warnings.
OPERATOR NOTE
Safety is just a word
until put into practice.
Safety must be the first
thing on your mind when
operating any piece of
machinery.
Failure to follow all
safety instructions can
result in serious injury or
death to you or any
spectators.
Remember…
SAFETY FIRST!