TR-MAN-4500-A
Operator's Manual - 4000M 4500M
Page 43 of 46
Indexing System Adjustment
The indexing should ONLY be checked when only the base layer of hose is
remaining on the drum. The hose connection should be in the 6 o’clock position
(closest to the ground). If gaps exist between the coils of the hose, set the drum brake
and manually push the coils together. If the hose does not travel straight off the drum
and through the hose guide it must be adjusted using the instructions below.
If safety shields are removed you MUST properly re-install them before
operating the machine
img-00135.png
img-00184.png
With the brake set and the hose connection
(barb on drum) at 6 o’clock, remove the indexer
shield.
Loosen the top idler wheel, and then remove the
chain from the sprocket on the gear box.
Img-00137.png
img-00138.wmf
Adjust the position of the hose guide by rotating
the sprocket.
The hose guide is properly aligned when the
hose travels in a straight line through the hose
guide and lays flush against the drum elbow or
previous coil of hose.
