TR-MAN-1500
Operator's Manual - Mini-Travellers
Page 16 of 83
Cadman Power Equipment ▪ BOX 100, Courtland, Ontario, Canada N0J-1E0 ▪ Phone: 519-688-2222 ▪ Fax: 519-688-2100 ▪ www.cadmanpower.com
DO NOT exceed 3 mph (5 km/h) while pulling out the hose. DO NOT stop
suddenly at the end of your travel lane. Slow gradually when nearing the
end of the pull. Keep spectators away from the machine while pulling out
the hose. Failure to follow these instructions may result in serious
equipment damage and potential for injuries to you and/or spectators.
Step 8
Verify the sprinkler set up is correct and install the correct nozzle. Also at this time,
set the part circle stops on the sprinkler. The sprinkler should be set behind the cart so
that the travel path remains dry until the cart passes.
Figure 16 - Correct Spray Setting
img-00201
Step 9
Your
Cadman Mini-Traveller
is equipped with an auto sprinkler shut-off system.
This system will stop the flow of water to the sprinkler at the end of each retrieve cycle.
When the Auto Shut-off System is used, there WILL be a pressure spike
within the supply circuit. Take the appropriate precautions to prevent
equipment damage and/or injury to you and/or spectators.
If you do not have appropriate precautions in place (i.e. automatic pump
shut down) DO NOT use this feature!
Disabled
If you would like to disable the automatic water shut-off, turn the ball valve to the off
position. Water will continue to flow once the sprinkler cart has been retrieved. No
further sprinkler cart adjustments are required.
Enabled
The valve trigger should be pulled away from the valve and valve button pushed in
towards the hose end of the sprinkler cart. Turn the ball valve to the open position.
This will allow water flow to the sprinkler. When the sprinkler cart has been retrieved
the valve trigger will shift the water shut-off valve and stop the flow of water to the
sprinkler.
