Cadillac XT4 Owner Manual (GMNA-Localizing-Europe-16412942) - 2023 -
CRC - 5/25/22
Infotainment System
145
place, such as an Address, Junction, POI,
or Contact. If Address or Junction is
selected, the second command is to say,
“
Change Country.
”
Once the system
responds, say the country before saying
the rest of the address and/or junction.
If POI is asked for, say
“
Change Location,
”
then
“
Change Country.
”
Direct commands might be more clearly
understood by the system. An example of a
direct command would be
“
Call <number>
”
.
Examples of these direct commands are
displayed on most of the screens while a
voice session is active. If
“
Phone
”
or
“
Phone
Commands
”
is spoken, the system
understands that a phone call is requested
and will respond with questions until
enough details are gathered to make a call.
If a mobile phone number has been saved
with a name and a place, the direct
command should include both, for example
“
Call <name> at work.
”
Using Voice Recognition for List Options
When a list is displayed, a voice prompt will
ask to confirm or select an option from
that list.
When a display contains a list, there may be
options that are available but not displayed.
The list on a voice recognition screen
functions the same as a list on other
displays. Scrolling or flinging can be used to
help display other entries from the list.
Manually scrolling or paging the list on a
display during a voice recognition session
suspends the current voice recognition event
and plays the prompt
“
Please select
manually or touch the Back icon on the
infotainment display to try again.
”
If manual selection takes more than
15 seconds, the session terminates and
prompts that it has timed out. The display
returns to the screen where voice
recognition was initiated.
The Back Command
Say
“
Back
”
or touch the Back icon on the
infotainment display to go to the previous
display.
If in voice recognition, and
“
Back
”
is spoken
all the way back to the starting display, and
then
“
Back
”
is spoken one more time, the
voice recognition session will cancel.
Help
Say
“
Help
”
on any voice recognition display
and the help prompt for the display is
played.
Touching
g
while the help prompt is
playing will terminate the prompt. Doing
this will stop the help prompt so that a
voice command can be used.
Voice Recognition for the Radio
If browsing the audio sources when voice is
touched, the voice recognition commands
for AM, FM, and DAB (if equipped) are
available.
“
Switch to AM
”
:
Switch bands to AM and
tune to the last AM radio station.
“
Switch to FM
”
:
Switch bands to FM and
tune to the last FM radio station.
“
Switch to DAB
”
:
Switch bands to DAB and
tune to the last DAB radio station.
“
Tune to <AM frequency> AM
”
:
Tune to
the radio station whose frequency is
identified in the command (like
“
nine fifty
”
).
“
Tune to <FM frequency> FM
”
:
Tune to the
radio station whose frequency is identified
in the command (like "one oh one
point one").