Cadillac XT4 2020, Owner'S Manual

Page: 137 / 314

Cadillac XT4 Owner Manual (GMNA-Localizing-MidEast-13527545) - 2020 -
CRC - 9/16/19
LIGHTING 137
Lighting
Exterior Lighting
Exterior Lamp Controls . . . . . . . . . . 137
Exterior Lamps Off Reminder . . . 138
Headlamp High/Low-Beam
Changer . . . . . . . . . . . . . . . . . . . . . . . . . . 139
Flash-to-Pass . . . . . . . . . . . . . . . . . . . . . 139
Daytime Running
Lamps (DRL) . . . . . . . . . . . . . . . . . . . . 139
Automatic Headlamp System . . . 139
Hazard Warning Flashers . . . . . . . . 140
Turn and Lane-Change
Signals . . . . . . . . . . . . . . . . . . . . . . . . . . . 140
Cornering Lamps . . . . . . . . . . . . . . . . . 141
Interior Lighting
Instrument Panel Illumination
Control . . . . . . . . . . . . . . . . . . . . . . . . . . 141
Courtesy Lamps . . . . . . . . . . . . . . . . . . 141
Dome Lamps . . . . . . . . . . . . . . . . . . . . . 141
Reading Lamps . . . . . . . . . . . . . . . . . . . 142
Lighting Features
Entry Lighting . . . . . . . . . . . . . . . . . . . . 142
Exit Lighting . . . . . . . . . . . . . . . . . . . . . . 143
Battery Power Protection . . . . . . . . 143
Exterior Lighting Battery
Saver . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 143
Exterior Lighting
Exterior Lamp Controls
The exterior lamp control is on the
turn signal lever.
Turn the control to the following
positions:
O
: Turns off the exterior lamps. The
knob returns to the AUTO position
after it is released. Turn to
O
again to
reactivate the AUTO mode.
AUTO : Automatically turns the
exterior lamps on and off, depending
on outside lighting.
;
: Turns on the parking lamps
including all lamps, except the
headlamps.
2
: Turns on the headlamps together
with the parking lamps and
instrument panel lights.
IntelliBeam System
If equipped, this system turns the
vehicle's high-beam headlamps on and
off according to surrounding traffic
conditions.
The system turns the high-beam
headlamps on when it is dark enough
and there is no other traffic present.
This light
b
comes on in the
instrument cluster when the
IntelliBeam system is enabled.
Turning On and Enabling IntelliBeam