Cadillac Escalade EXT 2013 Page 338 Owner'S Manual Download | Manualshive

Page: 338 / 476

background image

Black plate (10,1)

Cadillac Escalade EXT Owner Manual - 2013 - CRC - 4/5/12

10-10

Vehicle Care

Notice:

Use of the incorrect

automatic transmission fluid may
damage the vehicle, and the
damages may not be covered by
the vehicle warranty. Always use
the automatic transmission fluid
listed in

Recommended Fluids

and Lubricants on page 11

.

Change the fluid and filter at the
scheduled maintenance intervals
listed in

Maintenance Schedule on

. Be sure to use the

transmission fluid listed in

Recommended Fluids and
Lubricants on page 11

How to Check Automatic
Transmission Fluid

Notice:

Too much or too little

fluid can damage the
transmission. Too much can
mean that some of the fluid could
come out and fall on hot engine
parts or exhaust system parts,
starting a fire. Too little fluid
could cause the transmission to

overheat. Be sure to get an
accurate reading if checking the
transmission fluid.

Before checking the fluid level,
prepare the vehicle as follows:

1. Start the engine and park the

vehicle on a level surface. Keep
the engine running.

2. Apply the parking brake and

place the shift lever in P (Park).

3. With your foot on the brake

pedal, move the shift lever
through each gear range,
pausing for about three seconds
in each range. Then, move the
shift lever back to P (Park).

4. Allow the engine to idle (500

–

800 rpm) for at least one minute.
Slowly release the brake pedal.

5. Keep the engine running and

press the Trip/Fuel button or trip
odometer reset stem until
TRANS TEMP (Transmission
Temperature) displays on the
Driver Information Center (DIC).

6. Using the TRANS TEMP

reading, determine and perform
the appropriate check
procedure. If the TRANS TEMP
reading is not within the required
temperature ranges, allow the
vehicle to cool, or operate the
vehicle until the appropriate
transmission fluid temperature is
reached.

Cold Check Procedure

Use this procedure only as a
reference to determine if the
transmission has enough fluid to be
operated safely until a hot check
procedure can be made. The hot
check procedure is the most
accurate method to check the fluid
level. Perform the hot check
procedure at the first opportunity.
Use this cold check procedure to
check fluid level when the
transmission temperature is
between 27°C and 32°C (80°F
and 90°F).

«
...
336
337
338
339
340
...
»

Summary of Contents for Escalade EXT 2013





























































































































































































































































































































































































































































































Reviews:

No comments

Related manuals for Escalade EXT 2013

Brand: Yakima Pages: 7

Brand: Yakima Pages: 6

Brand: Yakima Pages: 10

Brand: Yakima Pages: 12

Brand: Uebler Pages: 18

Brand: Ford Pages: 37

Brand: Rati Pages: 2

Brand: Tachosys Pages: 28

2005 JR41 Stratus

Brand: Dodge Pages: 293

Brand: iSimple Pages: 8

Brand: Easee Pages: 21

Brand: Edelbrock Pages: 2

Brand: Kargo Master Pages: 10

ELECTRONIC SPEEDOMETER 1323

Brand: VDO Pages: 2

Brand: Van Guard Pages: 12

Brand: Masterack Pages: 15

Brand: Honda Pages: 441

Brand: LAMBORGHINI Pages: 83

Brands by name

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Popular brands

Load more brands