To unfold the seat:
1. Lower the seat by lifting the
release lever (B) located to the left
of the handle on the center rear of
the seat.
2. Pull down the seat until it latches
to the floor.
3. Lift up the seatback until it locks
in place. Pull on the seatback to
make sure it is locked.
To remove a seat:
1. Fold the seatback forward by lifting
the release lever (A) located at the
bottom rear of the seatback on the
outboard side of the seat.
2. Pull rearward using the handle (C)
on the center rear of the seat.
POWER LIFTGATE AND
LIFTGLASS OPERATION
Power Liftgate
Use the Remote Keyless Entry (RKE)
transmitter or the power door lock
switches to unlock the liftgate.
There are several ways to open and
close the power liftgate:
•
Press and hold the
(Power
Liftgate) button on the RKE
transmitter until the liftgate
starts moving.
•
Press the touchpad (A) on the
inside surface of the liftgate handle
to open.
•
Press the button on the bottom
edge of the liftgate to close.
•
Press the
button on
the overhead console inside
the vehicle.
To turn off the power liftgate
function, press the OFF button on the
overhead console.
Liftglass
There are two ways to unlatch the
liftglass:
•
Press the touchpad (B) on the
liftgate, located above the right
side of the license plate.
•
Press the
(Liftglass) button
on the RKE transmitter.
E S C A L A D E / E S C A L A D E E S V
A
B
76885_08a_Escalade_ESV_052407.qxd:Escalade_ESV 2007 A 5/24/07 2:32 PM Page 20
