Cadillac ESCALADE ESV 2005 Owner'S Manual Download Page 382 | Manualshive

Page: 382 / 482

background image

Passenger (P-Metric) Tire: A tire used on passenger
cars and some light duty trucks and multipurpose
vehicles.

Recommended Inflation Pressure: Vehicle
manufacturer’s recommended tire inflation pressure and
shown on the tire placard. See Inflation - Tire Pressure
on page 5-67 and Loading Your Vehicle on page 4-47.

Radial Ply Tire: A pneumatic tire in which the ply cords
that extend to the beads are laid at 90 degrees to the
centerline of the tread.

Rim: A metal support for a tire and upon which the tire
beads are seated.

Sidewall: The portion of a tire between the tread and
the bead.

Speed Rating: An alphanumeric code assigned to a
tire indicating the maximum speed at which a tire
can operate.

Traction: The friction between the tire and the road
surface. The amount of grip provided.

Tread: The portion of a tire that comes into contact
with the road.

Treadwear Indicators: Narrow bands, sometimes
called “wear bars,” that show across the tread of a tire
when only 1/16 inch (1.6 mm) of tread remains. See
When It Is Time for New Tires on page 5-73.

UTQGS (Uniform Tire Quality Grading Standards):
A tire information system that provides consumers
with ratings for a tire’s traction, temperature, and
treadwear. Ratings are determined by tire manufacturers
using government testing procedures. The ratings are
molded into the sidewall of the tire. See Uniform
Tire Quality Grading on page 5-75.

Vehicle Capacity Weight: The number of designated
seating positions multiplied by 150 lbs (68 kg) plus
the rated cargo load. See Loading Your Vehicle
on page 4-47.

Vehicle Maximum Load on the Tire: Load on an
individual tire due to curb weight, accessory weight,
occupant weight, and cargo weight.

Vehicle Placard: A label permanently attached to a
vehicle showing the vehicle’s capacity weight and
the original equipment tire size and recommended
inflation pressure. See “Tire and Loading Information
Label” under Loading Your Vehicle on page 4-47.

5-66

«
...
380
381
382
383
384
...
»

Summary of Contents for ESCALADE ESV 2005



































































































































































































































































































































































































































































































Reviews:

No comments

Related manuals for ESCALADE ESV 2005

Brand: ABL Pages: 176

Brand: ABL Pages: 94

Brand: Jeep Pages: 25

Brand: RAM Commercial Pages: 12

2011 Corolla LE

Brand: Toyota Pages: 19

Brand: Alpine Pages: 8

Brand: CITROEN Pages: 52

Brand: Subaru Pages: 34

Brand: Saab Pages: 3

Brand: BMW Pages: 55

Brand: Whispbar Pages: 15

Brand: Fab Fours Pages: 19

Brand: Boyo Pages: 9

Challenger 2013

Brand: Dodge Pages: 543

Brand: Volvo Pages: 266

2011 A3 Sportback

Brand: Audi Pages: 29

Brand: Cadillac Pages: 402

Brand: Cobra Pages: 2

Brands by name

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Popular brands

Load more brands