Cadillac Escalade 2004 Escalade ESV Owner'S Manual Download Page 29

Page: 29 / 472

Bucket Seats

If your vehicle has bucket seats, the seatbacks can be
reclined and the seats can be folded to give you
more cargo room.

Reclining the Seatbacks

To recline the seatback, do the following:

1. Pull up the lever

located under the seat
cushion. Escalade
lever shown,
Escalade ESV lever
similar.

2. Release the lever to lock the seatback where you

want it. Pull the lever again without pushing on the
seatback and the seatback will go to an upright
position.

Folding the Seatbacks

The seatbacks on the bucket seats may be folded
forward to give you more cargo space.

To fold the seatbacks on the bucket seats, do the
following:

1. Pull up on the strap

loop located at the rear
of the seat cushion
and pull the seat
cushion up and fold it
forward.

1-23

Summary of Contents for Escalade 2004 Escalade ESV

























































































































































































































































































































































































































































































Search results

Summary of Contents for Escalade 2004 Escalade ESV

Reviews:

Brands by name

Popular brands

Cadillac Escalade 2004 Escalade ESV, Owner'S Manual

Search results

Summary of Contents for Escalade 2004 Escalade ESV

Reviews:

Brands by name

Popular brands