Back-Up and License Plate Lamps
A. Back-Up Lamps
B. License Plate Lamps
To replace a back-up or license plate bulb, do the
following:
1. Open the trunk. See
Trunk on page 2-12 for more
information.
2. Remove the cloth cover on the trunk lid by pulling
out the three push-pins located on the underside of
the trunk lid.
3. Remove the eight mounting nuts from the underside
of the trunk lid by turning the nuts counterclockwise.
4. Pull the lamp assembly away from the vehicle to
expose the bulb sockets.
5. Turn the bulb socket one-quarter turn
counterclockwise and pull the bulb and socket out
of the lamp reflector.
6. Pull the old bulb from the bulb socket keeping the
bulb straight as you pull it out.
7. Install a new bulb.
8. Reverse the steps to reinstall the lamp assembly.
Replacement Bulbs
Exterior Lamp
Bulb Number
Back-Up Lamp
3157K
Fog Lamp
9145
Front and Rear Turn Signal Lamp 3157K
License Plate Lamp
W5WLL
Rear Sidemarker Lamp
3157K
Stoplamp
3157K
Taillamp
3157K
For replacement bulbs not listed here, please consult
your dealer.
5-52
Summary of Contents for CTC 2005
