5
ELECTRONIC PRECISION SHIFT
♦
The automatic transmission shift pattern is displayed on top of the
shift lever with the selected gear position illuminated in red. The
shift lever always starts in the center position and, after shifting,
returns to the center position.
Park
– Press the button (A)
on top of the lever to shift
into Park. To shift out of
Park, press and hold the
shift lock button (B) on
the side of the lever while
selecting the desired gear.
Reverse
– Press and hold
the shift lock button (B)
and move the lever for-
ward completely (pass the detent) to shift into Reverse.
Neutral
– Move the lever forward (to the detent) to shift into
Neutral.
Note: The transmission will not stay in Neutral for an extended period. It will
automatically shift into Park.
Drive
– Move the lever rearward to shift into Drive.
AUTOMATED CAR WASH MODE
When using an automatic car wash, there are different procedures
for placing the transmission in Neutral with the engine on or off,
and if the driver exits the vehicle. Refer to your Owner’s Manual for
each procedure.
See Driving and Operating in your Owner’s Manual.
TAP SHIFT MODE
With the transmission in Drive, pull back on the shift lever to
shift to Manual mode. Pull the left steering wheel paddle to
downshift and the right steering wheel paddle to upshift.
To return to Drive, move the shift lever to Drive or, if equipped
with Electronic Precision Shift
♦
, pull back on the lever again.
To engage in
Temporary Tap Shift
Mode, pull either the
left (downshift) or right
(upshift) steering wheel
paddle without moving
the shift lever. The
transmission will return
to automatic shifting
approximately 7–10
seconds after the last
manual shift.
See Driving and Operating in your Owner’s Manual.
♦
Optional equipment
A
B
