manualshive.com logo in svg

Cadillac ATS 2018, Owner'S Manual

The Cadillac ATS 2018 offers top-notch performance and luxury, coupled with advanced technology features. To enhance your driving experience, the Convenience/Personalization Manual provides comprehensive guidance on customizing settings. Easily download this valuable manual for free from our website, enabling you to optimize your Cadillac ATS to your preferences and convenience.

Share
Download
background image

Cadillac ATS/ATS-V Owner Manual (GMNA-Localizing-U.S./Canada/Mexico-

11349135) - 2018 - crc - 5/8/17

204

DRIVING AND OPERATING

Drive Systems

All-Wheel Drive

Vehicles with this feature always send
engine power to all four wheels. It is
fully automatic, and adjusts itself as
needed for road conditions.

Brakes

Antilock Brake
System (ABS)

This vehicle has an Antilock Brake
System (ABS), an advanced electronic
braking system that helps prevent a
braking skid.

When the vehicle begins to drive
away, ABS checks itself. A momentary
motor or clicking noise may be heard
while this test is going on, and it may
even be noticed that the brake pedal
moves a little. This is normal.

If there is a problem with ABS, this
warning light stays on. See

Antilock

Brake System (ABS) Warning Light

0

127

.

If driving safely on a wet road and it
becomes necessary to slam on the
brakes and continue braking to avoid

a sudden obstacle, a computer senses
the wheels are slowing down. If one of
the wheels is about to stop rolling, the
computer will separately work the
brakes at each wheel.

ABS can change the brake pressure to
each wheel, as required, faster than
any driver could. This can help you
steer around the obstacle while
braking hard.

As the brakes are applied, the
computer keeps receiving updates on
wheel speed and controls braking
pressure accordingly.

Remember: ABS does not change the
time needed to get a foot up to the
brake pedal or always decrease
stopping distance. If you get too close
to the vehicle in front of you, there
will not be enough time to apply the
brakes if that vehicle suddenly slows
or stops. Always leave enough room
up ahead to stop, even with ABS.

Summary of Contents for ATS 2018








































































































































































































































































































































































































Reviews:

No comments

Related manuals for ATS 2018

Alpine KCE-G7QI Installation preview
KCE-G7QI
Brand: Alpine Pages: 2
Whispbar K896W Fitting Instructions Manual preview
K896W
Brand: Whispbar Pages: 15
Yakima K831 Manual preview
K831
Brand: Yakima Pages: 8
FormFit HD 10L07 Installation Instructions preview
HD 10L07
Brand: FormFit Pages: 2
kincrome K12071 Owner'S Assemble And Operating Manual preview
K12071
Brand: kincrome Pages: 6
WABCO TP19108 Installation Manual preview
TP19108
Brand: WABCO Pages: 32
Ford 2005 P207 Explorer Sport Trac Owner'S Manual preview
2005 P207 Explorer Sport Trac
Brand: Ford Pages: 540
PAC Stinger ELEV8 Install Manual preview
Stinger ELEV8
Brand: PAC Pages: 14
Kolpin 98310 Product Instructions preview
98310
Brand: Kolpin Pages: 3
Kia Sorento Owner'S Manual preview
Sorento
Brand: Kia Pages: 51
Skoda OCTAVIA - TECHNICAL CHANGES 11-2009 Owner'S Manual Supplement preview
OCTAVIA - TECHNICAL CHANGES 11-2009
Brand: Skoda Pages: 16
Edelbrock 29135 Installation Instructions preview
29135
Brand: Edelbrock Pages: 2
Mercedes-Benz 1989 560 SL Owner'S Manual preview
1989 560 SL
Brand: Mercedes-Benz Pages: 93
Acura 2003 3.2 TL Owner'S Manual preview
2003 3.2 TL
Brand: Acura Pages: 347
Easee Base 1-Way User Manual / Installation Manual preview
Base 1-Way
Brand: Easee Pages: 21
Nos 05183NOS Owner'S Manual preview
05183NOS
Brand: Nos Pages: 22
Painless Performance VORTEC 60211 Installation Instructions Manual preview
VORTEC 60211
Brand: Painless Performance Pages: 16
EUFAB 11439 Assembly preview
11439
Brand: EUFAB Pages: 8

Brands by name

Popular brands

Load more brands