Cadillac 2017 CT6 Owner'S Manual Download Page 43

Page: 43 / 341

Cadillac CT6 Owner Manual (GMNA-Localizing-MidEast-9418855) - 2016 -

crc - 12/15/15

Keys, Doors, and Windows

Unlock the vehicle using the
Keyless Access system.

Start the vehicle.

To avoid setting off the alarm by
accident:

Lock the vehicle after all
occupants have left the vehicle
and all doors are closed.

Always unlock a door with the
RKE transmitter or use the
Keyless Access system.

Unlocking the driver door with the
key will not disarm the system or
turn off the alarm.

How to Detect a Tamper
Condition

is pressed on the RKE

transmitter and the horn chirps and
the lights flash three times, a
previous alarm occurred while the
system was armed.

If the alarm has been activated, a
message will appear on the DIC.
See

Security Messages

147

Power Sounder, Inclination
Sensor, and Intrusion Sensor

In addition to the standard
theft-deterrent system features, this
system may also have a power
sounder, inclination sensor, and
intrusion sensor.

The power sounder provides an
audible alarm, which is distinct from
the vehicle

’

s horn. It has its own

power source, and can sound an
alarm if the vehicle

’

s battery is

compromised.

The inclination sensor can set off
the alarm if it senses movement of
the vehicle, such as a change in
vehicle orientation.

The intrusion sensor monitors the
vehicle interior, and can activate the
alarm if it senses unauthorized entry
into the vehicle

’

s interior. Do not

allow passengers or pets to remain
in the vehicle when the intrusion
sensor is activated.

Before arming the theft-deterrent
system and activating the intrusion
sensor:

Make sure all doors and
windows are completely closed.

Secure any loose items such as
sunshades.

Make sure there are no
obstructions blocking the
sensors in the front overhead
console.

Inclination and Intrusion
Sensors Disable Switch

It is recommended that the intrusion
and inclination sensors be
deactivated if pets are left in the
vehicle or if the vehicle is being
transported.

Summary of Contents for 2017 CT6






















































































































































































































































































































































Search results

Summary of Contents for 2017 CT6

Reviews:

Related manuals for 2017 CT6

Brands by name

Popular brands

Cadillac 2017 CT6, Owner'S Manual

Search results

Summary of Contents for 2017 CT6

Reviews:

Related manuals for 2017 CT6

Brands by name

Popular brands