Cadillac 2017 CT6 Owner'S Manual Download Page 138

Page: 138 / 341

Cadillac CT6 Owner Manual (GMNA-Localizing-MidEast-9418855) - 2016 -

crc - 12/15/15

Instruments and Controls

137

HUD Display on the Vehicle

Windshield

The HUD may display some of the
following vehicle information and
vehicle messages or alerts:

Speed

Tachometer

Audio

Phone

Navigation

Collision Alert

Cruise Control

Lane Keep Assist

Low Fuel

Some vehicle messages or alerts
displayed in the HUD may be
cleared by using the steering wheel
controls. See

Vehicle

Messages

139

The HUD control is to the left of the
steering wheel.

To adjust the HUD image:

1. Adjust the driver seat.

2. Start the engine.

3. Use the following settings to

adjust the HUD.

Press down or lift up to center

the HUD image. The HUD image
can only be adjusted up and down,
not side to side.

Press to select the display

view. Each press will change the
display view.

Lift up and hold to brighten

the display. Press down and hold to
dim the display. Hold down to turn
the display off.

The HUD image will automatically
dim and brighten to compensate for
outside lighting. The HUD
brightness control can also be
adjusted as needed.

The HUD image can temporarily
light up depending on the angle and
position of the sunlight on the HUD
display. This is normal.

Polarized sunglasses could make
the HUD image harder to see.

HUD Views

There are four views in the HUD.
Some vehicle information and
vehicle messages or alerts may be
displayed in any view.

Summary of Contents for 2017 CT6






















































































































































































































































































































































Search results

Summary of Contents for 2017 CT6

Reviews:

Related manuals for 2017 CT6

Brands by name

Popular brands

Cadillac 2017 CT6, Owner'S Manual

Search results

Summary of Contents for 2017 CT6

Reviews:

Related manuals for 2017 CT6

Brands by name

Popular brands