19
ELECTRIC PARKING BRAKE
HOOD RELEASE
TIRE PRESSURE MONITOR
To apply the parking brake,
press the Parking Brake
switch on the left side of the
instrument panel.
To release the parking brake,
turn on the ignition, press the
brake pedal, and then press the
switch.
See Driving and Operating in your Owner Manual.
To open the hood, pull and release the hood release handle on
the lower-left side of the instrument panel. Pull and release the
handle again to fully open the hood. There is not a secondary
latch under the hood.
See Vehicle Care in your Owner Manual.
The Low Tire Pressure warning light on the instrument cluster
illuminates when one or more of the vehicle’s tires is significantly
underinflated. Fill the tires to the proper tire pressures. The proper
tire pressures for the vehicle are listed on the Tire and Loading
Information label, located below the driver’s door latch. Current tire
pressures can be viewed in the Driver Information Center.
Refer to your Owner Manual for additional information about normal
monthly tire maintenance.
See Vehicle Care in your Owner Manual.
♦
Optional equipment
Automatic Vehicle Hold will hold the vehicle stationary after the
brake pedal has been released and until the accelerator pedal is
pressed. The indicator illuminates in green on the instrument clus-
ter when the system is holding the vehicle.
To turn the system on or off, press the AUTO HOLD button on
the center console with the driver’s safety belt fastened, the
driver’s door closed and the engine on.
See Driving and Operating in your Owner Manual.
The rear camera mirror
provides a wide angle
camera view of the area
behind the vehicle.
Pull or push the
lever (A) at the
bottom of the mirror
to turn the video
display on or off.
To adjust the bright-
ness of the display, press and release the button (B) on the top
back of the mirror without covering the light sensor. There are 5
brightness settings.
See Keys, Doors and Windows in your Owner Manual.
AUTOMATIC VEHICLE HOLD
REAR CAMERA MIRROR
♦
B
A
